alanchan

SOGO的銷售手法, 我都中過招, 最後我都係將快板用2蚊送了出去.........

因為當年係買板新手, 又無係上網搜查一下資料, 見到個價錢, 心入面想都唔會差得去邊LA, 點知.......我最記得果快成600蚊的830粘性的膠.......連100蚊左右未灌膠的狂飆3都不如............

不過SOGO就係足心理技巧的高手, 所以人一世物一世, 中招都在所難免~~~~

alanchan

引用:

原帖由 kanlok 於 2012-6-16 15:19 發表
得個彈字 會好爆 但唔多咬波

其實果快Kendo唔係檜木的板, 係一般的科技木面材而入面加碳的板, 只有手柄的肩一小部份係檜木. 可能因為佢有條木護邊包洒成快板所以睇唔出個結構.
嚴格來講, 只係一快一般的碳板........

Kendo

This is possibly the most "fancy" and best constructed blade that I've ever seen. Measuring 6.39mm thick, it's a 5+2 ply construction with a colour veneer (Fineline wood I believe) surface. Inside, there is a second ply of Ayous, sitting on top of a Carbon layer, with a Balsa-Koto core. Unfortunately, the blade has a band of colour veneer around the edge so I can't tell you the thicknesses. If I had to guess though, the core would be around 3.5mm. The blade does not have your usual carbon laminate "ping", so I'd guess towards a carbon fleece type layer (Unless it was a stiga carbon-glue layer).

科技木+阿柔絲+碳+飛機木+碳+阿柔絲+科技木

[ 本帖最後由 alanchan 於 2012-6-16 16:00 編輯 ]

alanchan

引用:

原帖由 BrianDD 於 2012-6-17 15:58 發表

幫百希達代工的工廠也有和其它品牌代工的
如,stiga donic yasaka BTY Andro joola TSP Kinson 等

邊個代工唔緊要, 個重點係價錢.......

如果完全相同的兩快板(同結構同功能同手感同一家大陸廠生產), 一快係ABC牌賣緊50蚊, 一快係百希達賣緊5000蚊, 又有人講到明完全相同, 而自己又試打過真係無分別. 我自己真係要買都買ABC牌吧~~~
OK就算有一家出名的品牌, 假如係Stiga, 佢賣緊150蚊, 我都在品牌效應下今心地買~~~~

所以, 如果呢個價錢, 超越某一個界線之後, 就比人的感覺唔好囉~~~~

[ 本帖最後由 alanchan 於 2012-6-17 20:20 編輯 ]